9,500x Tensa / Retractable Belt Barriers / Crowd Control

We have a large quantity of furniture items available for sale after just 2 – 4 weeks of use in the Rio Olympics!
Product Specification:
- Chrome
- 910mm high. Base 320mm diameter
- Rio 2016 Branded 2.3m retractable tape

£9.99 +VAT ono each

9,500x Tensa / Retractable Belt Barriers. Crowd Control

| Quantity: 9500

Twin Axle Draw Bar Trailer - Warwickshire

Built in 2010 by J.S. Fraser, this twin axle draw bar trailer has a 7m long, 2.35m wide and 3.14m high body and is 13m overall length with the draw bar (which can be removed).
The trailer was a bespoke design to promote brand awareness and retail sales.
This unit is fitted with in built underfloor electrical sockets and slat walled throughout.

£10000 £6950 +VAT ono

6m Silver Inflatable Cube (New) - London

The temporary structures are ideal for outdoor or indoor events - inflatable cinema, corporate events, VIP/Bar area, social occasions.
Available: Brand-new, in original packaging including 1 x air pump per unit.

£2500 £1620 inc. VAT each

| Quantity: 2

10m Inflatable Translucent Domes - New - London

The temporary structures are new and are still in the original wrapping.
Great for outdoor or indoor events - corporate events, festivals or social occasions.

£5500 £4950 inc. VAT each

| Quantity: 8

Exhibition Panels - Cambridgeshire

A vast amount of Clip panels and poles in carious colours and sizes. Comes with lights and wheeled carry cases as shown. Can be used in many different ways and if you know the panel and pole systems you'll understand that Clip are the best ones. When purchased new they cost over 40k. Would need a large Luton or a couple of vans to collect as there is that much kit. Graphic panels can be attached using Velcro. Comes with 4 wooden plinths that would need painting.
Reduced now for a quick sale...…

£4000 £2000 +VAT

Exhibition Trailer - Cardiff

5mtr exhibition trailer, excellent condition, purchased from new from Mobex in 2017 used only 5 times. No work has been carried out on the trailer so the inside is still the same as when purchased (shell). The trailer is white in colour with a grey non slip floor, barn doors with overhead canopy on gas struts. Electric safety certificate.

£8750 +VAT ono

2 Channel Reinforced Rubber Cable Protector 1m Long - Essex

This two channel cable protector from Master Audio.
Made from reinfored rubber complying to Directive 2006/95/EC.
Interlocking ends
1m x 250mm x 50mm

£45 +VAT ono each

2 Channel Reinforced Rubber Cable Protector 1m Long

| Quantity: 50

Exhibition Plinths - Art Gallery Provenience - Solid Wood - Handmade - London

Following the closure of a ceramic art gallery in Central London I sell exhibition plinths.
What's available:

10 plinths 40 x 40 x 100 cm height at £90 each (slightly negotiable based on scratches and marks)

1 plinth 50 x 50 x 100 cm height at £110

The plinths are handmade in Italy by a local artisan and are made of birch wood with three layers of white paint given.

£90 VAT Free ono each

| Quantity: 10

Race Start and Finish Line Truss Gantry System Style 1 - H4m x W8m

Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£4340 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H4m x W8m

| Quantity: 10

Gable asset Finance - Click for a competitive quote

Conway 3.8m Twin Axle Exhibition Trailer - Devon

Conway Exhibition trailer with electric, in good condition, rarely used.
Box measurements (L/W/H) 3.8m/1.7m/2.2m,overall length including tow hitch 5m.Width including wheel arches 2.1m, height 2.6m.

£6750 £4950 VAT Free

Modular Pop-Up Exhibition Stand - Bristol

Large, modular pop-up banner for marketing at trade shows, exhibitions, expos or events.

This is a modular banner meaning it is comprised of 3 foldable sections that can be linked together with an extra vinyl artwork panel or used separately. Can be set up straight, curved, L-shaped or a combination. Makes it a very flexible unit for different events, uses and spaces.

Two straight 3X3 banners (each one is 2.7m wide X 30cm deep X 2.2m high)
One straight 3X2 banner (2.1m wide X 30cm deep X 2.2m high)

If you join them with a vinyl artwork panel (30cm) you can create a total wall of approximately 6.6m. The artwork is easy to attach with magnetic magbars which connect with the artwork.

It comes with three sturdy, wheeled carry cases with pull up handle (98H X 65W X 45Dcm ~23kg packed) for transporting. These can be taken as hold luggage on plane.

There is a foldable birch table top for turning one case into a display counter. You can then purchase graphic wraps to finish.

Comes with all artwork templates and supplier/product details to make reskinning easy. Artwork and print is of a very high quality.

Originally purchased for £1635
Hardware value £920
To 'reskin' with your artwork would cost approximately £500 + £40 for the case graphic wrap.

Actual unit is in very good condition. Cases have a few superficial scuff marks but all in perfect working order. Purchased from Marler Hayley and used twice.

£600 inc. VAT ono

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex

Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£2360 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m

| Quantity: 10

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W6m

Brand new Pre selected Race Gantry System with total exterior dimensions of 3m high x 4m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display. These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing. We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£3929 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W6m

| Quantity: 10

Armordeck - Trackway / Flooring - Top Spec Marquee Floor - Cheshire

ArmorDeck® is the most advanced engineered heavy-duty temporary special event flooring and turf protection system on the market today.
Translucent with aeration holes, to create a uniform, fully connected floor for all event areas. £38 inclusive per panel – with some spare panels and edging plus ArmorDeck tool.
Quantity – 330 panels @ £30 p/panel = £9,900 (Price reduced due to business move, this will sell quick)

Half Price! £9900 inc. VAT

| Quantity: 330

Show Trussing System Model A - Complete Exhibition Tri Truss Stand L3m W3m H2.5m - Sizes available inc Custom Design and Build

We offer a full design and supply service for Tri, Quad, Ladder Trussing systems.
We have a large selection of pre packaged stands and display booths designed specifically for the trade show and exhibition market. These are complete 'ready to go' systems from the fantastic Duratruss range, which include all necessary fixtures and fittings.
We also offer a full range of accessories for you to personalise your chosen system, from vinyl printed banners, display screens, lighting and smoke effects units, stage decks, stand furniture, drapes and curtains.
If a pre packaged unit does not offer what you're after, we can custom design systems to your exact requirements through our UK manufacturer, so please call us to discuss your needs.

£1000 +VAT each

| Quantity: 30

White Stools & Glass Topped Poseur Tables - Carlisle, Cumbria

White Stools & Glass Topped Poseur Tables for Sale Excellent Condition
I am selling the following from my events business as need space; all in excellent condition

16 x White Adjustable, gas lift Stools £30 each
3 x White Adjustable gas lift Stools with backs £35.00 each
Glass Topped Poseur Table to match stools - 1 round 5 square - tops removable for easy transportation - £40.00 each

From £30 VAT Free ono each

White Stools & Glass Topped Poseur Tables

| Quantity: 20

Clip Pole and Panels - Northumberland

This system is ideal to be hired out to your clients as it has carry cases to protect the panels and they can either put up themselves or you can do this for them. There are slatwall panels so the client can hang items using Eurohooks. Loop nylon panels are frameless so you can run graphics flush across the joins.
The stand can be re configured for your clients needs picture shows 6mtr x 4mtr x 2.4mtr high but there are still lots of spare poles and panels this was a configuration I had done for a client.