Masters Exhibition Units
Search
 Showing 21 - 40 of 245 items
These white interior flag poles are 2.5 meters tall
There are x10 - three arm
x1 - one arm pole

They are brand new and have been used once are in very good condition

£350 +VAT ono

white interior flag poles 2.5 meters tall
| Quantity: 11
Steeldeck 4ft Steps
Completely refurbished and noise proofed less than 6 months ago.
These have been used once since they were stripped down to metal. powder coated and re assembled with sound proof carpet on the underside.

£350 £300 inc. VAT

Steeldeck steps for sale
Literature rack made of steel and sprayed light grey
Has 10 off A4 holders, Base 300mm x 450mm overall height 1440mm
Used only once are still wrapped and boxes
Excellent condition

£39 £19 VAT Free ono each

Literature rack made of steel and sprayed light grey
| Quantity: 2
Here we have a bubble tent structure in blue which is ideal to host a bar, Santa's Ice Grotto or party tent or many other mini potential uses.
Can be used indoors or outdoors though caution should be taken of wind speed and rain (due to electric fans though these could be covered) when using outdoors.

£3499 £1499 VAT Free ono

Bubble tent for sale
HFA Removals
Sales display boards ideal for showrooms trade stands etc.
This price is for one but i have 6 of these for sale.
Used but in a good condition - some have small amount of surface rust on the base.

£35 £20 VAT Free ono each

Sales Display Boards x 6
| Quantity: 6
Here we have a Nimlok Exhibition Display System comes complete in its own specialised storage crate. It is used but mostly in a very good condition one side panel is damaged but not noticeable once up. There might be a couple of joints missing for the front desk and the keys to the cupboards, but these are easily replaceable, although hasn't affected our used for the last few years. Cost nearly £20000 15 years ago so a bargain now. Comes with lighting system as well. Also full instruction book and can be shown how to construct on collection.

£1350 £900 VAT Free ono

Nimlok Exhibition Display System
The temporary structures are ideal for outdoor or indoor events - inflatable cinema, corporate events, VIP/Bar area, social occasions.
Available: Brand-new, in original packaging including 1 x air pump per unit.

£2500 £1460 inc. VAT each

Silver inflatable cube for sale
| Quantity: 2
The temporary structures are new and are still in the original wrapping.
Great for outdoor or indoor events - corporate events, festivals or social occasions.

£5500 £4455 inc. VAT each

Inflatable dome for sale
| Quantity: 6
4m x 6m Complete 4 Tier Stage Deck Seating Tribune Package - Natural Finish
Full package system, ready to use including all the required fixtures and fittings.
This pre-selected stage deck based seating tribune system is perfect for choirs, churches, schools, theatres, music events and any number of other uses where a portable height staggered seating system is required.
The beauty of the SCA-03 stage deck platform is that it can easily be added or subtracted from a larger system when the need requires, or the budget allows, so if you are limited to starting off with just a few decks but with the aim of adding in further units to build a system over time, then this is the perfect platform for that purpose. For much larger systems, we can supply stair units and access ramps for disabled users.

£3650 +VAT each

Stage Deck 4 Level Tiered Seating Tribune 4m x 6m Package Natural Finish
| Quantity: 10
Gable asset Finance - Click for a competitive quote
4m x 6m Complete 4 Tier Stage Deck Seating Tribune Package - Black Anti Slip Finish
Full package system, ready to use including all the required fixtures and fittings.
This pre-selected stage deck based seating tribune system is perfect for choirs, churches, schools, theatres, music events and any number of other uses where a portable height staggered seating system is required.
It comes complete with safety railings and detachable chair leg backstop plinths, and all the required mountings and mechanical fixings including leg clamps which secures each deck to the one it's next to for enhanced stability and movement reduction.
For much larger systems, we can supply stair units and access ramps for disabled users.

£3900 +VAT each

Stage Deck 4 Level Tiered Seating Tribune 4m x 6m Package - Anti Slip Finish
| Quantity: 10
Built in 2010 by J.S. Fraser, this twin axle draw bar trailer has a 7m long, 2.35m wide and 3.14m high body and is 13m overall length with the draw bar (which can be removed).
The trailer was a bespoke design to promote brand awareness and retail sales.
This unit is fitted with in built underfloor electrical sockets and slat walled throughout.

£10000 £6950 +VAT ono

Trailer Twin Axle
A vast amount of Clip panels and poles in carious colours and sizes. Comes with lights and wheeled carry cases as shown. Can be used in many different ways and if you know the panel and pole systems you'll understand that Clip are the best ones. When purchased new they cost over 40k. Would need a large Luton or a couple of vans to collect as there is that much kit. Graphic panels can be attached using Velcro. Comes with 4 wooden plinths that would need painting.
Reduced now for a quick sale...…

£4000 £2000 +VAT

clip panel and pole system
5mtr exhibition trailer, excellent condition, purchased from new from Mobex in 2017 used only 5 times. No work has been carried out on the trailer so the inside is still the same as when purchased (shell). The trailer is white in colour with a grey non slip floor, barn doors with overhead canopy on gas struts. Electric safety certificate.

£8750 +VAT ono

Trailer for sale
This two channel cable protector from Master Audio.
Made from reinfored rubber complying to Directive 2006/95/EC.
Interlocking ends
1m x 250mm x 50mm

£45 +VAT ono each

2 Channel Reinforced Rubber Cable Protector 1m Long
| Quantity: 50
Following the closure of a ceramic art gallery in Central London I sell exhibition plinths.
What's available:

10 plinths 40 x 40 x 100 cm height at £90 each (slightly negotiable based on scratches and marks)

1 plinth 50 x 50 x 100 cm height at £110

The plinths are handmade in Italy by a local artisan and are made of birch wood with three layers of white paint given.

£90 VAT Free ono each

Exhibition Plinths For Sale
| Quantity: 10
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£4340 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H4m x W8m
| Quantity: 10
Conway Exhibition trailer with electric, in good condition, rarely used.
Box measurements (L/W/H) 3.8m/1.7m/2.2m,overall length including tow hitch 5m.Width including wheel arches 2.1m, height 2.6m.

£6750 £4950 VAT Free

Exhibition trailer by Conway
Large, modular pop-up banner for marketing at trade shows, exhibitions, expos or events.

This is a modular banner meaning it is comprised of 3 foldable sections that can be linked together with an extra vinyl artwork panel or used separately. Can be set up straight, curved, L-shaped or a combination. Makes it a very flexible unit for different events, uses and spaces.

Two straight 3X3 banners (each one is 2.7m wide X 30cm deep X 2.2m high)
One straight 3X2 banner (2.1m wide X 30cm deep X 2.2m high)

If you join them with a vinyl artwork panel (30cm) you can create a total wall of approximately 6.6m. The artwork is easy to attach with magnetic magbars which connect with the artwork.

It comes with three sturdy, wheeled carry cases with pull up handle (98H X 65W X 45Dcm ~23kg packed) for transporting. These can be taken as hold luggage on plane.

There is a foldable birch table top for turning one case into a display counter. You can then purchase graphic wraps to finish.

Comes with all artwork templates and supplier/product details to make reskinning easy. Artwork and print is of a very high quality.

Originally purchased for £1635
Hardware value £920
To 'reskin' with your artwork would cost approximately £500 + £40 for the case graphic wrap.

Actual unit is in very good condition. Cases have a few superficial scuff marks but all in perfect working order. Purchased from Marler Hayley and used twice.

£600 inc. VAT ono

exhibition stand for sale
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£2360 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m
| Quantity: 10
Brand new Pre selected Race Gantry System with total exterior dimensions of 3m high x 4m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display. These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing. We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£3929 +VAT each

Race Start and Finish Line Truss Gantry System Style 1 - H3m x W6m
| Quantity: 10
HFA Removals
Load more listings